• head_banner_01

Products

  • Perkins Generator Parts

    Perkins Generator Parts

    Perkins Diesel Generator Spare Parts, Genset Parts, Perkins Engin Parts, Power Station accessory
  • Yangdong Generator Parts

    Yangdong Generator Parts

    Engine Model: YANGDONG Y380 Y385 Y480 Y485 Y490 Y4100 Y4102 Y4105 YTO         YTR4105          YTR4108 Main parts Starter/ Alternator Rebuilt kit: Cylinder liner/ Piston/ Piston pin/ Piston ring/ circlip/ water seal O-ring Crankshaft/ thrust piece of crankshaft/ rock arm assembly Connecting rod/ Main Bearing shell/ Connecting rod Bearing Fuel injection pump/ Fuel injector/ Injector nozzle/ Plunger Cylinder head/ Head gasket/ cylinder block Intake valve/ exhaust valve Oil pump/Water pump assy/...
  • Alternator Parts
  • Generator Components

    Generator Components

    1 cylinder block bushing cylider liner kit expansion plug piston cooling nozzle 2 cylinder head intake valve exhaust vavle valve insert valve spring 3 valve spring valve collet valve rotator valve stem guide cylinder head gasket 4 Crankshaft main bearing thrust bearing oil seal vibration damper 5 connectng rod piston piston pin piston ring con rod bearing 6 camshaft camshaft gear camshaft bushing woodruff key thrust bearing 7 rocker lever rocker lever shaft rocker lever...
  • Control Panel

    Control Panel

    DSE 3110 Comap MRS11 Comap MRS16 Comap connector interface dse 5220 HMC9000A DSE 8610 DSE 5510 DSE702 DSE7120 HGM6320D IC-NT Original Harson SMARTGEN HGM6120 Comap AMF20 -2 GU620A-2 Standard configuration  ● Configuring single or with ATS function controller● Use UL Certification Cable ● Configuring float, 50 / 60Hz universal, DC12 / 24V optional ● Emergency stop: manual / automatic start switch ● Surge protection relay loop configuration  ● Water temperature protection and monitoring● ...
  • ATS

    ATS

    AUTOMATIC TRANSFER SWITCH -ATS For home and other circumstances, Automatic Transfer Switch (ATS) is essential. ATS can automatically transfer load between the main power and the emergency (generator set) without operator. When the main power fails or voltage drops below 80% of normal voltage, the ATS will start the emergency generator set after a preset time of 0-10 seconds (adjustable) and transfer the load to the emergency power (generator set). On the contrary, when the main power recovers...
  • Gasoline Generator

    Gasoline Generator

    Description: Gasoline Generator,home generator,Gasoline Generator set,Gasoline Genset,Gasoline Portable Generator,Small Generator KT Gasoline generator sets are usually used for emergency communications, emergency repairs, or backup power supplies for small access network computer rooms and computer rooms. They are equipped with electric starting devices. Compared with ordinary hand-starting generators, starting is easier and easier! Huge diesel units cannot be transported, and light gasoline...
  • Diesel Generator

    Diesel Generator

    Description: Small Diesel Generator,Home Diesel Generator,Portable Generator,5kw Diesel Generator,10kw Diesel Generator. KT Small diesel generator sets are small in size, strong horsepower, safe and reliable in use, and stable in quality. They are widely used in mines, railways, field construction sites, road traffic maintenance, and factories, enterprises, hospitals and other departments as backup or temporary power sources. Features: *Economy Hand pull start system *Start quickly, reach ful...
  • KT Natural Gas Generator set

    KT Natural Gas Generator set

    Requirements for Natural gas: (1) The methane content should not be lower than 95%. (2) The natural gas temperature should be between 0-60。 (3) No impurity should be in the gas. Water in the gas should be less than 20g/Nm3. (4) Heat value should be at least 8500kcal/m3, if less than this value, the power of the engine will be declined. (5) Gas pressure should be 3-100KPa, if the pressure is less than 3KPa, booster fan is necessary. (6) The gas should be dehydrated and desulfurized. Make sure...
  • KT Biogas Generator set

    KT Biogas Generator set

    Requirements for biogas: (1) The methane content should not be lower than 55%. (2) The Biogas temperature should be between 0-601D. (3) No impurity should be in the gas. Water in the gas should be less than 20g/Nm3. (4) Heat value should be at least 5500kcal/m3, if less than this value, the power of the engine will be declined. (5) Gas pressure should be 3-1 OOKPa, if the pressure is less than 3KPa, booster fan is necessary. (6) The gas should be dehydrated and desulfurized. Make sure that th...
WhatsApp Online Chat !