Polycrystalline Module
ADVANCED PERFORMANCE & PROVEN ADVANTAGES
High module conversion efficiency up to 18.30% through innovative five busbar cell
technology.
Low degradation and excellent performance under high temperature and low light conditions.
Robust aluminum frame ensures the modules to withstand wind loads up to 3600Pa and snow loads up to 5400Pa.
High reliability against extreme environmental conditions (passing salt mist, ammonia and hail tests).
Potential induced degradation (PID) resistance.
CERTIFICATIONS
IEC 61215, IEC 61730, UL 1703, IEC 62716, IEC 61701, IEC TS 62804, CE, CQC, ETL(USA), JET(Japan), J-PEC(Japan),KS(South Korea),BIS(India),MCS(UK),CEC(Australia), CSI Eligible(CA-USA), Israel Electric(Israel), InMetro(Brazil), TSE(Turkey)
ISO 9001:2015: Quality management system
ISO 14001:2015: Environmental management system
ISO 45001:2018: Occupational health and safety management system
SPECIAL WARRANTY
20 years product warranty
30 years linear power output warranty
| ELECTRICAL CHARACTERISTICSAT STC | |||||||
| Maximum Power(Pmax) | 325W | 330W | 335W | 340W | 345W | 350W | 355W |
| Open Circuit Voltage(Voc) | 45.7V | 45.9V | 46.1V | 46.3V | 46.5V | 46.7V | 46.9V |
| Short Circuit Current(Isc) | 9.28A | 9.36A | 9.44A | 9.52A | 9.60A | 9.68A | 9.76A |
| Voltage at Maximum Power(Vmp) | 37.1V | 37.3V | 37.5V | 37.7V | 37.9V | 38.1V | 38.3V |
| Current at Maximum Power(Imp) | 8.77A | 8.85A | 8.94A | 9.02A | 9.11A | 9.19A | 9.27A |
| Module Efficiency(%) | 16.75 | 17.01 | 17.26 | 17.52 | 17.78 | 18.04 | 18.3 |
| Operating Temperature | -40℃ to+85℃ | ||||||
| Maximum System Voltage | 1000V DC/1500V DC | ||||||
| Fire Resistance Rating | Type 1(in accordance with UL 1703 ）/Class C(IEC 61730) | ||||||
| Maximum Series Fuse Rating | 15A | ||||||
STC: lrradiance 1000W/m² , Cell temperature 25℃,AM1.5;Tolerance of Pmax:±3%; Measurement Tolerance:±3%
| ELECTRICAL CHARACTERISTICSAT NOCT | |||||||
| Maximum Power (Pmax) | 241W | 244W | 248W | 252W | 256W | 259W | 263W |
| Open Circuit Voltage (Voc) | 42.0V | 42.2V | 42.4V | 42.6V | 42.8V | 43.0V | 43.2V |
| Short Circuit Current (lsc) | 7.52A | 7.58A | 7.65A | 7.71A | 7.78A | 7.84A | 9.91A |
| Voltage at Maximum Power (Vmp) | 33.7V | 33.9V | 34.1V | 34.3V | 34.5V | 34.7V | 34.9V |
| Current at Maximum Power (lmp) | 7.16A | 7.20A | 7.28A | 7.35A | 7.42A | 7.47A | 7.54A |
NOCT: Irradiance 800W/m² , Ambient temperature 20℃, Wind Speed 1 m/s
| MECHANICAL CHARACTERISTICS | |
| Cell type | Polycrystalline 6inch |
| Number of cells | 72(6x12) |
| Module dimensions | 1956x992x35mm (77.01x39.06x1.38inches) |
| Weight | 21kg (46.3lbs) |
| Front cover | 3.2mm (0.13inches) tempered glass with AR coating |
| Frame | Anodized aluminum alloy |
| Junction box | IP67, 3 diodes |
| Cable | 4mm²(0.006inches²),1000mm (39.37inches) |
| Connector | MC4 or MC4 compatible |
| TEMPERATURE CHARACTERISTICS | |
| Nominal Operating Cell Temperature (NOCT) | 45℃±2℃ |
| Temperature Coefficients of Pmax | -0.39%/℃ |
| Temperature Coefficients of Voc | -0.30%/℃ |
| Temperature Coefficients of lsc | 0.05%/℃ |
| PACKAGING | |
| Standard packaging | 31pcs/pallet |
| Module quantity per 20' container | 310pcs |
| Module quantity per 40' container | 744pcs(GP)/816pcs(HQ) |
Related products
-
Use Line Pipe to Lead Down
Description:This kind of charging pile is installed on the wall, the bridge is laid above, and the wire pipe is used to lead down to the charging pile along the wall, and the charging pile is connected to the wire. Charging pile is high-end intelligent charging product for BEV to Europe market specially is sue. Appearance delicacy, installation convenience. Adopt self-service operation that suitable for a variety of charging application scenarios. User can complete charging、payment etc opera...
-
Monocrystalline Module
ADVANCED PERFORMANCE & PROVEN ADVANTAGES High module conversion efficiency up to 18.30% through innovative five busbar cell technology. Low degradation and excellent performance under high temperature and low light conditions. Robust aluminum frame ensures the modules to withstand wind loads up to 3600Pa and snow loads up to 5400Pa. High reliability against extreme environmental conditions (passing salt mist, ammonia and hail tests). Potential induced degra...
-
KT Biogas Generator set
Requirements for biogas: (1) The methane content should not be lower than 55%. (2) The Biogas temperature should be between 0-601D. (3) No impurity should be in the gas. Water in the gas should be less than 20g/Nm3. (4) Heat value should be at least 5500kcal/m3, if less than this value, the power of the engine will be declined. (5) Gas pressure should be 3-1 OOKPa, if the pressure is less than 3KPa, booster fan is necessary. (6) The gas should be dehydrated and desulfurized. Make sure that th...
-
KT-cummins Series Diesel Generator
Description: KT-cummins Series Diesel Generator Cummins (NYSE: CMI) was founded in 1919 and is headquartered in Columbus, Indiana, USA. Cummins is named after its founder, Claire Lyle Cummins, who is a self-taught auto mechanic and mechanical inventor. Cummins is headquartered in Columbus, Indiana, USA. The company provides services to customers through its 550 distribution agencies and more than 5,000 dealer outlets in more than 160 countries and regions around the world. Cummins has 34,600 ...
-
KT-Perkins Series Diesel Generator
Description: Perkins Engine Co., Ltd. is a subsidiary of Caterpillar Corporation and is one of the world's major suppliers of off-road diesel and natural gas engines. Perkins Engine Co., Ltd. was established in 1932, with an annual output of nearly 400,000 engines. Perkins provides 4-2000 kW diesel and gas engines to large power equipment manufacturers such as Chrysler, Ferguson and Wilson. More than 800 leading manufacturers choose Perkins power solutions in agriculture, power generation, co...
-
ATS
AUTOMATIC TRANSFER SWITCH -ATS For home and other circumstances, Automatic Transfer Switch (ATS) is essential. ATS can automatically transfer load between the main power and the emergency (generator set) without operator. When the main power fails or voltage drops below 80% of normal voltage, the ATS will start the emergency generator set after a preset time of 0-10 seconds (adjustable) and transfer the load to the emergency power (generator set). On the contrary, when the main power recovers...
